RTD to mA DC converter/isolator, with 2/3/4 wire PT100/Ni100 resistance thermometer input and provides a mA output signal (4 to 20mA or 20 to 4mA). Configurable output range. DIN rail mounting. Power supply 5 ~ 30Vdc or through K-BUS accessory

Pt100 and Ni100 to 4..20mA (loop powered) converter - non isolated/ configured

Power supply / amplifier for on/off sensors/ Power supply 24 Vac / dc

Isolator / Converter with one input for (mA, mV, V, RTD, TCs, ohms) and convert it to an output signal from 4 to 20mA. Galvanic isolation of 3 ways. DIN rail mounting. Feeding from 7 to 30Vdc or with K-BUS accessory

Welding thermowell, with 1/2" male PT100

Pt100 standard IEC 751/ Trap lenght 200 mm

Pt100 standard IEC 751/ Trap lenght 50 mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 100mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 150mm

10 CH DO module / RS485 ModBUS RTU

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 200mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 50mm

Dual Power Supply For Current Loop/ Power supply. 115 / 230 Vac

RS232 - RS485/422 serial converter, portable version

USB <-> RS485 converter / isolator

DC current/voltage to DC current/voltage isolator/converter/ Power supply. 115 / 230 Vac

DC current/voltage to DC current/voltage isolator/converter/ input up to 200 Vdc

Power supply / amplifier for on/off sensors/ Power supply. 115 / 230 Vac

Power supply / amplifier for on/off sensors/ Power supply. 115 / 230 Vac

Asynchronous serial converter. Interfaces: RS232 (DB9), RS485 (5-pin terminal), TTL (RJ10), Mini USB B. 32 serial nodes max. with Modbus RTU protocol. Power supply through PC USB port. Op. temperature -20 to +65°C. IP20. External supply 12 Vdc @ 100 mA.