Three-phase network analyzer. Power Supply 10-30 VDC, Datalogger, Connection mode: Single-phase, 3-phase 3 or 4 wire, 8 MB Flash Memory, Modbus RTU/TCP-IP, max. input voltaje 600 VAC. 1 0-10 VDC + 1 4-20 mA outputs.

Photodetector for pulse counting

RS485 / RS485 serial repeater, used to extend both the length or the number of devices admitted (Maximum 32) on the RS485 serial line. DIN rail mounting. Power supply: 19 ~ 30Vdc direct in conditioner or with K-BUS accessory

RS232 <--> RS485 serial converter, ideal for long-distance isolated transmissions. It has an X port: RS232 and a Y port: RS485. DIN rail mounting. Power supply: 19 ~ 30Vdc direct in conditioner or with K-BUS accessory

RS485 <--> USB asyncronous serial converter, interface able to implement a RS485 serial port by using a PC USB port. Connect Modbus devices to PC by USB. DIN rail mounting. Power by USB port. Includes USB connection cable

DC low voltage converter to mA or V. Input scales +/- 25mV to +/- 2000mV. Ideal for current shunts. 3-way galvanic isolation (Power supply, input and output). DIN rail mounting. Power supply 19 ~ 30 Vdc directly to terminals or through K-BUS accessory

RTD to mA/V DC converter/isolator, with 2/3/4 wire PT100 resistance thermometer input and provides a mA/V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

RTD to mA/V DC converter, with PT100 input of 2/3/4 wires and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc directly to terminals or through K-BUS accessory

High performance converter from RTD to mA/V DC, with PT100 input of 2/3/4 wires and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

DC current/voltage to DC current/voltage isolator/converter. Input from 0/4 to 20mA or 0 to 10V and output 0/4 to 20mA or 0 to 10V. Configurable I/O range. DIN rail mounting. Power supply 19~30Vdc directly to terminals or through K-BUS accessory

DIN rail bus system head terminal + 3 slot 17.5 mm

Thermocouple to mA / V converter, with thermocouple input type B, E, J, K, R, S, T, N and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

Analog voltage/current converter with 0-10Vdc/4-20mA input and output, 1.5 kVac galvanic isolation, 3-way, DIN rail mounting, 24 Vdc power supply, optional K-BUS connectivity

Amplifier/Converter with a pulse input (Contact IEC 1131.1 tipo 1, Namur, PNP/NPN, reed, photocell) and 2 outputs (PNP, BJT, Mosfet) of 60 mA/24Vdc. Max frequency: 20KHz. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

Universal digital conditioner / isolator, one pulse input (Contact IEC 1131.1, Namur, PNP / NPN, reed, photocell) and 2 simultaneous outputs (NPN, PNP) of 30Vdc. Max frequency: 400Hz. DIN rail mounting. Feeding from 19 ~ 30Vdc or K-BUS accessory