Manufacturers

AC current to DC current/voltage isolator and converter. Input 5A or 10A AC, output: voltage: 0~1, 0~5, 0~10, 2~10 V dc or Current: 0~20 or 4~20 mA. 3-way galvanic isolation among power supply, input and output. Power supply 10~40 Vdc or 19~28 Vac

Converter / isolator of AC / DC voltage to DC current, with AC / DC input (0 ~ 500Vac / 0 ~ 540Vdc) configurable by DIP Switch and output 4 to 20mA. 3-way galvanic insulation (power, input and output). DIN rail mounting. Power supply of 5 ~ 28Vdc

AC current to DC current/voltage isolator and converter. Input 5A or 10A AC, output: voltage: 0~1, 0~5, 0~10, 2~10 V dc or Current: 0~20 or 4~20 mA. 3-way galvanic isolation among power supply, input and output. Power supply 85~265 Vac/Vdc

Converter/isolator of AC voltage to DC current/voltage, with AC input (0 ~ 500Vac) and current or voltage output (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Galvanic insulation. DIN rail mounting. Power supply: 10 to 40Vdc or 19 to 28Vac

Converter/isolator of AC voltage to DC current/voltage, with AC input (0 ~ 500Vac) and current or voltage output (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Galvanic insulation. DIN rail mounting. Power supply: 85~265 Vac/Vdc

Module with 3 channels of analog output (0 ~ 20mA, 4 ~ 20mA or -10 ~ 10 V, 0 ~ 10 V, 2 ~ 10 V) of 14 bits. RS-485 port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), Overload voltage protection, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac

Module with 4 channels of analog inputs (± 2 Vcd / ± 10 Vcd / ± 20 mA) with 14-bit resolution. RS-485 port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), Overload voltage protection, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac

Module with 4 independent and isolated input channels for platinum or nickel RTD (with 2,3 or 4 wires). RS-485 port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), MicroUSB on the front panel, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac

Module with 8 channels of analog inputs (± 2Vcd / ± 10Vcd / ± 20mA) of 14-bit. RS-485 and RS-232 (DB9 Jack stereo 3.5 mm)port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), Overload voltage protection, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac

External Relay interface for Z-PC modules

Mixed module with 16 CH digital inputs and 8 CH digital outputs, 32-bit counters in the inputs with a frequency of 10kHz, communication protocol: CANopen or ModBUS RTU (protocol selectable by dip-switch), power supply 10 to 40Vdc / 19 to 28Vac

24 CH DI module / CANOPEN-RS485 ModBUS RTU

24 CH DO module / CANopen-RS485 ModBUS RTU

DAQ module with CANopen protocol and 8 independent input channels for J, K, E, N, S, R, B, and T thermocouples. CANopen communication port on IDC10 connector and Modbus RTU via RS232 jack port. For CANopen communication and power supply connection, module Z-PC-DINAL2-17.5 is required; power supply required is 10-40 Vdc or 19-28 Vac

Module with a universal analog input (Voltage, Current, potentiometer, TC, RTD) and an active output 4 to 20mA or 0 to 20mA with PID regulation. Modbus RTU communication with RS-485 port (Requires Z-PC-DINAL2-17.5), power supply 10~40Vdc or 9~28Vac

Strain gauge module / CANOPEN

5 CH DI module / RS485 ModBUS RTU

5 CH DO Relay module / RS485 ModBUS RTU din rail mounting

1 slot 35mm DIN rail bus system for Z-PC Line I/O fast mounting and connection

DIN rail Plastic clip (spare part) for transducers T201 Series