All products

Threee-phase power meter kit including nr.1 S604E Ethernet,1MB mem. Log + nr. 3 Rogowski coils RC150 L= 30cm Øint. 9,5 cm

Threee-phase power meter kit including nr.1 S604E Ethernet,1MB mem. Log + nr. 3 Rogowski coils RC150 L= 45cm Øint. 14 cm

Threee-phase power meter kit including nr.1 S604B Ethernet,1MB mem. Log+ nr. 3 Rogowski coils RC150 L= 70cm Øint. 22 cm

LCD 96x96 Energy PLUS Power Meter,  TA1/5A-RS485 Modbus,8MB log.,1 DI 2 DO, harmonics

Three-phase energy power meter model S711E with 8MB memory. THD & harmonics measures. Voltage measurement up to 600Vac and 5A input for current. Backlighted LCD. 1 DI, 2 DO and 1 Ethernet port with Modbus TCP. Power supply requirement 85~265Vac / 110Vdc

LCD 96x96 Energy PLUS Power Meter Kit , Ethernet,8MB log.,1 DI 2 DO, harmonics, 3 Rogowski RC150 L= 45 cm Øint. 14cm

Passive current transformer 100 adc closed core, configuration with DIP switch, input from 0 to 100A (Monopolar) and -10 to 100A (Bipolar). Output from 4 to 20mA, power 6 to 100V. Includes 2 x A-DIN-T201 for DIN rail mounting

AC/DC contactless TRMS direct and alternate current transducer with input for +/- 50A AC/DC, configurable by DIP switch, output from 0 a 10 Vdc, diameter of 12.3 mm, power supply 10 to 28 Vdc, Includes 1x A-DIN-T201 for DIN rail mounting

RTD (PT100, PT1000, PT500, Ni100) to DC current/voltage isolator converter. Fully configurable via dip switches or software through front micro-USB port. Features 3-way galvanic isolation (power / input / output). Requires a 10 to 40 Vdc or 19 to 28 Vac power supply to operate

Universal converter with 1 analog input (mA, V, RTD, TCs, Ohm), 1 strobe input, 1 anaog output mA/V and 1 digital contact available as ALARM or STROBE, settable by DIP switch or software with microUSB. Power supply 10 ~ 40 Vdc / 19 ~ 28 Vac

Thermocouple to DC isolator / converter. Converter Thermocouples TCs (J/K/ E/ N/ S/ R/ B/ T) and provides a mA/V standard output signal. It’s completely programmable via MicroUSB/App. Power supply: 10~40 Vdc / 19~28 Vac / 50-60 Hz

Converter / isolator with a current input (+/-20mA) or voltage (100mV ~ 20V) and a current output (0 ~ 20 mA / 4 ~ 20mA) or voltage (0 ~ 10V / 2 ~ 10V). 1.5 kVac galvanic isolation, DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac

Universal analog signal duplicator and isolator module. 1 universal input configurable as voltage (0-10 V), current (0-20 mA), potentiometer (1 kΩ to 100 kΩ), thermocouple (J, K, R, S, T, B, E, N), or RTD (Pt100, Pt500, Pt1000, Ni100; 2, 3, or 4-wire). 2 independent outputs configurable as voltage (0-10 V) or current (0-20 mA active or passive) with 14-bit resolution. 4-way galvanic isolation at 1500 Vac. Configuration via DIP switches, software, or mobile app via Micro-USB port. DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac (not included)

Data acquisition (DAQ) module with 4 digital inputs, 2 analog inputs (mA/V), and 2 relay outputs (5A). Supports Modbus TCP-IP and Modbus RTU communication. Features one 10/100 Ethernet port, two RS485 ports, and one mini USB port. DIN-rail mounting, plastic housing. Power input 11 to 40 Vdc or 19 to 28 Vac

AC/DC contactless TRMS direct and alternate current transducer, input for +/- 50A AC/DC, configurable by DIP switch or software, output from 0 to 10V, RS-485 port, Modbus RTU, power supply 10 to 28VDC, Includes 2 x A-DIN-T201 for DIN rail mounting

AC/DC contactless TRMS direct and alternate current transducer, input for +/- 100A AC/DC, configurable by DIP switch or software, output from 0 to 10V, RS-485 port, Modbus RTU, power supply 12 to 28VDC, Includes 2 x A-DIN-T201 for DIN rail mounting

AC/DC contactless TRMS direct and alternate current transducer to measure up to +/- 300 A DC/AC (csettable by DIP switch or Software) with 0~10Vdc output and ModBUS interface. Power supply 12~28 Vdc. Includes 2 x A-DIN-T201 for DIN rail mounting

8-CH, NTC module with modbus RTU protocol (requires PC-DINAL2-17.5) .Reading value in resistance or temperature (° C, ° F, ° K). Each channel can be individually enabled and configured via DIP switches or software. Power supply: 10~40 Vdc or 19~28 Vac

ModBUS RTU/ASCII Compact Gateway. Power Supply: 10~40VDC; 19~28VAC. 1x Ethernet Port, 1x serial Port RS232/RS485 commutable. Modbus Bridge Finction: from ModBUS TCP-IP to Modbus RTU/ASCII or from ModBUS RTU/ASCII to Modbus TCP-IP.

GSM controller and alarm unit with 1 digital input and 1 SPDT output relay (3 A / 250 Vac). Quad band 850/900/1800/1900 MHz. Configuration by micro USB and partially via SMS. Includes antenna and baterry. Requieres 10~30 Vdc. Power supply not included