All products

Input interface for Photoelectric sensor, AICHI turbine, IP65 protected case (80 x 80 mm).

4 digit microprocessor indicator with bargraph - dimension 96*96 mm/ Power supply 115 / 230 Vac ± 10%; 50-60 Hz/ output retransmitted

4 digit microprocessor indicator with bargraph - dimension 96*96 mm/ Power supply 115 / 230 Vac/ out. 4 open collector alarms/ RS232/RS485

4 digit microprocessor indicator with bargraph - dimension 96*96 mm/ Power supply 115 / 230 Vac/ out. 3 relay alarms/ RS232/RS485

Indicator-Totalizer with universal analog input/ Power 10-40 Vdc / 19-28 Vac/ 11 digits

Indicator-Totalizer with universal analog input/ Power 10-40 Vdc / 19-28 / 11 digits/ opt. card

8 digit display with universal analog input indicator - totalizer. 1 analog input (mA, V, PT100, Thermocouple, Ohm). 1 analog output (V, mA). IP65 in front panel. Power input 80-265 Vac

Indicator-Totalizer with universal analog input/ Power. 80-265 Vac/ 8 digits/ optional card

Adapter module for sinusoidal sensor input

8 digit display with universal analog input indicator - totalizer. 1 analog input (mA, V, PT100, Thermocouple, Ohm). 1 analog output (V, mA). IP65 in front panel. Power input 10-40 Vdc or 19-28 Vac

Indicator-Totalizer with universal analog input/ Power 10-40 Vdc / 19-28 / 8 digits/ opt. card

4-CH analog input module / RS485 Modbus RTU module. Power Supply: 10~40 Vdc; 19~28 Vac (50-60 Hz). Input: CH-4 voltage (up to a ±10 Vdc) or current range (up to ±20 mA). Resolution: 15 bit + sign

4 Ch RTD (P100, Ni100, Pt500, Pt1000) input CANopen module

Data acquisition module featuring 8 analog input channels (configurable for voltage or current) with 16-bit resolution. Communication via CANopen protocol (rear IDC10 connector) and Modbus RTU via RS232 (front jack port). DIN rail mounting. For CANopen communication and power connection, the Z-PC-DINAL2-17.5 terminal block is required (not included). Power input: 10 to 40 Vdc or 19 to 28 Vac (power supply not included)

16GB MicroSD Card, for PyroMini -BRT and -CRT, and PM180 models, for storage and transfer of logged data. Includes SD Card adapter.

Test-4 Calibration Certificate

MyAlarm2, security audio, SD card, clamps, grey color case

MyAlarm2, security audio, SD card, relay board, clamps, blue color case

GSM/GPRS controller, Commands via SMS, ring tones, DTMF, 4-CH DI, 4-CH AI (mA, V) and 2-CH SPST relay outputs (3 Amp), micro SD card plug (max 32GB, not included). Includes GSM stilo antenna, power supply and micro USB cable. Grey case

RS485 to optical fiber converter. Single mode fiber - single loop converter. LC connectors, maximum distance of 10 km, power supply input range: 12~35Vdc or 8~24Vac. Power supply not included