Skip to Content
  1. Products ...
  2. Manufacturers
  3. SENECA S.R.L.

SENECA S.R.L.

[T121] T121

T121

2 Wires Universal temperature transmitter (loop power supply)
MXN 1.00

USD 117.86

[T201] T201

T201

AC Current Trasducer to DC current, adjustable input range by dip switch 5, 10, 15, 20, 25, 30, 35, 40A. Output 4 to 20mA, power supply range 5 to 28Vdc. Includes 1 x A-DIN-T201 for DIN rail mounting
MXN 1.00

USD 80.48

[Z102] Z102

Z102

Potentiometric to DC isolator/converter, accepts the signal from the rheostat (2 wires) or the potentiometer (3 wires) and analogue current output (0-20mA and 4-20mA) or voltage (0-5/1- 5/0-10 and 2 to 10Vdc). Power supply: 10 to 40Vdc or 19 to 28Vac
MXN 1.00

USD 169.59

[T201DC] T201DC

T201DC

DC Current Trasducer to DC current with input from 0 to 40A (Monopolar) and -5 to 40A (Bipolar). Output from 4 to 20mA, power 6 to 100V. Includes 1 x A-DIN-T201 for DIN rail mounting
MXN 1.00

USD 135.11

[Z107] Z107

Z107

RS-232 to RS485/422 Converter. 1500Vac Isolation. Operation: Half or Full Duplex, point-point or multidrop. Connections: RS232: via terminal block or RJ10. RS485: via terminal block. DIN Rail mounting. Power Supply requirement 19~40 Vdc or 19~28 Vac
MXN 1.00

USD 159.53

[Z109REG2-H] Z109REG2-H

Z109REG2-H

Acondicionador universal con una entrada análoga (Termopar/ RTD/ potenciómetro/ V/ mV/ mA)/ una salida análoga (V/ mA) y una salida de relevador. Configurable por DIP Switch y software. Alimentación de 85-265 Vca/cd
MXN 1.00

USD 237.14

[Z110S] Z110S

Z110S

DC current isolator (self-powered) with a single input from 4 to 20mA and output from 4 to 20mA, galvanic isolation 1.5 kVac 2-way, DIN rail mounting. Power supply: From the 4-20 mA input loop
MXN 1.00

USD 117.86

[Z111] Z111

Z111

Frequency (Contact, reed, NPN, PNP, namur, photoelectric, hall effect sensor, 24V or TTL) to analog DC mA or V isolator and converter. Input range from 1 mHz to 9.99 KHz. 3-way galvanic isolation. DIN rail mounting. Power supply 19 ~ 40Vdc/19 ~ 28Vac
MXN 1.00

USD 234.27

[Z112A] Z112A

Z112A

Digital contact amplifier/ 1 channel. Input: free contact, npn/pnp 2-3 wire, 24 Vdc, namur, photoelectric, Hall sensor, variable reluctance. Output: Nr 1 relay SPDT (5 A, 250 Vac)
MXN 1.00

USD 140.85

[Z112D] Z112D

Z112D

Digital contact amplifier/ 2 channels
MXN 1.00

USD 140.85

[Z190] Z190

Z190

DC current / voltage Adder / subtracter, allows the addition or subtraction of 2 analog signals and obtain the equivalent output through an analog signal (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Feeding: 10 to 40Vdc or 19 to 28Vac
MXN 1.00

USD 267.33

[Z201] Z201

Z201

AC current to DC current/voltage isolator and converter. Input 5A or 10A AC, output: voltage: 0~1, 0~5, 0~10, 2~10 V dc or Current: 0~20 or 4~20 mA. 3-way galvanic isolation among power supply, input and output. Power supply 10~40 Vdc or 19~28 Vac
MXN 1.00

USD 148.03

[Z202-LP] Z202-LP

Z202-LP

Converter / isolator of AC / DC voltage to DC current, with AC / DC input (0 ~ 500Vac / 0 ~ 540Vdc) configurable by DIP Switch and output 4 to 20mA. 3-way galvanic insulation (power, input and output). DIN rail mounting. Power supply of 5 ~ 28Vdc
MXN 1.00

USD 158.10

[Z201-H] Z201-H

Z201-H

AC current to DC current/voltage isolator and converter. Input 5A or 10A AC, output: voltage: 0~1, 0~5, 0~10, 2~10 V dc or Current: 0~20 or 4~20 mA. 3-way galvanic isolation among power supply, input and output. Power supply 85~265 Vac/Vdc
MXN 1.00

USD 171.04

[Z202] Z202

Z202

Converter/isolator of AC voltage to DC current/voltage, with AC input (0 ~ 500Vac) and current or voltage output (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Galvanic insulation. DIN rail mounting. Power supply: 10 to 40Vdc or 19 to 28Vac
MXN 1.00

USD 206.97

[Z202-H] Z202-H

Z202-H

Converter/isolator of AC voltage to DC current/voltage, with AC input (0 ~ 500Vac) and current or voltage output (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Galvanic insulation. DIN rail mounting. Power supply: 85~265 Vac/Vdc
MXN 1.00

USD 222.77

[Z-3AO] Z-3AO

Z-3AO

Module with 3 channels of analog output (0 ~ 20mA, 4 ~ 20mA or -10 ~ 10 V, 0 ~ 10 V, 2 ~ 10 V) of 14 bits. RS-485 port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), Overload voltage protection, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac
MXN 1.00

USD 237.14

[Z-4AI] Z-4AI

Z-4AI

Module with 4 channels of analog inputs (± 2 Vcd / ± 10 Vcd / ± 20 mA) with 14-bit resolution. RS-485 port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), Overload voltage protection, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac
MXN 1.00

USD 192.59

[Z-4RTD2] Z-4RTD2

Z-4RTD2

Module with 4 independent and isolated input channels for platinum or nickel RTD (with 2,3 or 4 wires). RS-485 port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), MicroUSB on the front panel, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac
MXN 1.00

USD 373.68

[Z-8AI] Z-8AI

Z-8AI

Module with 8 channels of analog inputs (± 2Vcd / ± 10Vcd / ± 20mA) of 14-bit. RS-485 and RS-232 (DB9 Jack stereo 3.5 mm)port. Modbus RTU communication (Requires Z-PC-DINAL2-17.5), Overload voltage protection, power supply 10 ~ 40 Vdc or 19 ~ 28 Vac
MXN 1.00

USD 217.02

(noscript) -->