Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. 4 to 20 mA output, Probe lenght 200mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. 4 to 20 mA output, Probe lenght 250mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. 4 to 20 mA output, Probe lenght 300mm

PT100 handheld transmitter with PT-250-2-M12 probe

PT100 handheld transmitter with PT-150-3R-M12 probe

PT100 handheld transmitter with PT-150-3-M12, PT-250-3-M12, PT-150-3R-M12 probes

DC Current isolator

Converter with RTD (Pt100/ Pt1000/ Pt500/ Ni100) with 2,3,4 wires and 1 anaog output mA/V and 1 output signal mA/V, galvanic insolation 3-way, settable by DIP switch and software, microUSB port on The front side, Power supply 10~40Vdc / 19~2888 Vac

Thermocouple to DC isolator / converter. Converter Thermocouples TCs (J/K/ E/ N/ S/ R/ B/ T) and provides a mA/V standard output signal. It’s completely programmable via MicroUSB/App. Power supply: 10~40 Vdc / 19~28 Vac / 50-60 Hz

Rogowski Coil L=180cm Øint.57cm,100mV/1KA-50Hz,cable L=3mt.

DC current/voltage to frequency isolator/converter. Input: Current 0..20, 4..20 mA; voltage 0..5, 1..5, 0..10, 2..10 Vdc. Output: Transistor NPN open collector 30 Vdc 300 mA; reed relay 30 Vdc/ac 100 mA, max frequency 10 kHz. Power Supply 19..40 Vdc.

Frequency Trip alarm unit with isolated output/ configured

Weld-in thermowell with 1/2" Gas Male PT100

PT100 handheld probe, class B, d=3 mm, L= 150 mm, round tip, M12M connector

Thermocouple handheld transmitter with TCK-250-3-M12 and TCK-W-1000-M12 probes

Thermocouple handheld transmitter with TCK-AC-M12 and TCK-W-1000-M12 probes

Thermocouple handheld transmitter with TCK-AC-M12, TCK-250-3-M12, TCK-250-1,5-M12 and TCK-W-1000-M12 probes

Temperature / Relative Humidity handheld transmitter with UT-M12 probe

DC current isolator. with a current input (0 ~ 20mA / 4 ~ 20mA) and a current output (0 ~ 20mA / 4 ~ 20mA). 1.5 kVac galvanic isolation, DIN rail mounting. Can feed 2-wire sensors, Power: 10 to 40 Vdc or 19 to 28 Vac

Z-4TC-D allows to acquire up to N.4 Thermocouple sensors (J, K, E, N, S, R ,B ,T) through a PLC with only digital input/output.