Digital isolator

Thermocouple to mA / V converter, with thermocouple input type B, E, J, K, R, S, T, N and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

Power supply / amplifier for on/off sensors/ Power supply 24 Vac / dc

Power supply / amplifier for on/off sensors/ Power supply. 115 / 230 Vac

Single-channel digital amplifier for ON/OFF sensors. Features a pulse divider (from 1 to 256) configurable via DIP switches and pulse output length (from 100 to 500 ms) by rotatng a trimmer in the front panel. 1 input compatible with optoisolated contact, Reed, 2/3-wire NPN, 3-wire PNP, NAMUR, 24 Vdc pulses, photoelectric sensor, or Hall effect sensor (400 Hz max frequency). 1 SPDT relay output (5 A at 250 Vac or 1 A at 30 Vdc, resistive load). 3-way galvanic isolation at 1500 Vac. DIN rail mounting. Power input: 19 to 40 Vdc or 19 to 28 Vac (power supply not included)

Mixed module with 16 CH digital inputs and 8 CH digital outputs, 32-bit counters in the inputs with a frequency of 10kHz, communication protocol: CANopen or ModBUS RTU (protocol selectable by dip-switch), power supply 10 to 40Vdc / 19 to 28Vac

Universal analog signal duplicator and isolator module. 1 universal input configurable as voltage (0-10 V), current (0-20 mA), potentiometer (1 kΩ to 100 kΩ), thermocouple (J, K, R, S, T, B, E, N), or RTD (Pt100, Pt500, Pt1000, Ni100; 2, 3, or 4-wire). 2 independent outputs configurable as voltage (0-10 V) or current (0-20 mA active or passive) with 14-bit resolution. 4-way galvanic isolation at 1500 Vac. Configuration via DIP switches, software, or mobile app via Micro-USB port. DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac (not included)