Single element 3 wires Pt100 for photovoltaic modules

Strain gauge / load cell signal converter. Input for 4 or 6 wire. Input 1~64mV/V settable by DIP-switch or software, analog output configurable 0~20, 4~20 mA, 0~5 or 0~10 Vdc. Power supply 10~40Vdc or 19~28Vac, Profinet IO protocol

Terminal HMI touchscreen 15" con puerta Ethernet y carcasa de aluminio

Terminal HMI touchscreen 7" con puerta Ethernet y carcasa de aluminio

Analog and Digital Signals Surge Protection, 6,2 slim  

Energy PLUS Network Analyzer 80A-RS485 Modbus,8MB log. harmonics

Batch controller, 24 Vac / dc

MyALARM2 - GSM/GPRS datalogger, GPS version, clamps, blue color, IP66 case

Stabilised power supply 5V 1A with USB-A port

IIoT Edge Gateway, integrated I/Os, GPS receiver, and 4G modem, This device features 2 analog inputs and 6 configurable general-purpose digital (DI/DO) channels, With 2 Fast Ethernet ports (1 LAN port, 1 WAN port), 3 serial ports, and 1 USB host 2.0 port

Unidad de control avanzada IEC61131, IDE Straton y Linux based

Serial communication cable (DB9M / MEF 10-12) 3 wires, 1,5 mt

Rogowski coil designed for accurate non-intrusive measurement of AC/ pulsed DC or complex waveforms This type of transducer may be used to measure all AC current from low frequencies to 5 kHz.

2 Wires transmitter - loop powered for TC/ RTD/ Ohm/ V_isolated

3-cell battery pack, 11,1 V - 14,5 Ah for M-RTU

Sensore de Rogowski, salida 333 mV/kA @ 50Hz, Ø sensore 100..580 mm

Sensore di Rogowski, uscita 100 mV/kA @ 50Hz, Ø bobina 80..580 mm