Sensors & Transducers

WEIGHT INDICATOR MODEL W200BOX UNLOAD IP67 + ANALOG OUT-PUT ATEX MARKED Ex II 3GD Ex nR [ic] IIC T6 Ex tc [ic] IIIC T57°C X (-20°C = Tamb=+50°C)

WEIGHT INDICATOR MODEL W200BOX UNLOAD IP67 WITH POLYAMID CABLE GLANDS

WEIGHT INDICATOR MODEL W200BOX UNLOAD IP67 ATEX MARKED Ex II 3GD Ex nR [ic] IIC T6 Ex tc [ic] IIIC T57°C X (-20°C = Tamb=+50°C)

WEIGHT INDICATOR MODEL W200 LOAD + ANALOG OUT-PUT

WEIGHT INDICATOR MODEL W200 LOAD + ANALOG OUT-PUT 115Vac

WEIGHT INDICATOR MODEL W200 WITH INPUT 0-10V

WEIGHT INDICATOR MODEL W200 MULTIPROGRAM + ANALOG OUT-PUT + START AND STOP BUTTONS + EC SELECTOR 115Vac

WEIGHT READING VIA SERIAL IN-PUT OF 1 INSTRUMENT FOR W100, W200, WDOS, WDESK, WINOX, WTAB

DECLARATION OF CONFORMITY + IPX9K PROTECTION RATING MARKING FOR FT-P MODEL

DECLARATION OF CONFORMITY + IPX9K PROTECTION RATING MARKING FOR CTL MODEL

WEIGHT READING VIA 0-10Vcc IN-PUT FOR W100, W200, WDOS, WDESK, WINOX, WTAB

WEIGHT INDICATOR MODEL W200 MULTIPROGRAM + ANALOG OUT-PUT. 230Vca

WEIGHT INDICATOR MODEL W200 MULTIPROGRAM

DECLARATION OF CONFORMITY + IPX9K PROTECTION RATING MARKING FOR WEIGHT INDICATOR WINOX

Weight transmitter with a backlit 60 × 32 mm LCD graphic display (128 × 64 pixels), four calibration keys, and a TEST key for direct access to diagnostic functions. Dimensions: 148 × 92 × 60 mm. Features 8 independent load cell reading channels, digital equalization, automatic diagnostics, and an inclinometer function. Designed for rear-panel Omega/DIN rail or enclosure mounting. Includes a 16-bit analog output (0/4–20 mA; 0–5/10 V), RS485 Modbus RTU port, 3 digital inputs, and 5 relay outputs. OIML R 76:2006 approved, Class III, 10,000 divisions. Sensitivity: 0.2 μV/VSI. Equipped with an 8-channel, 24-bit A/D converter (16,000,000 points), operating at 4.8 kHz, with up to 999,999 display divisions.

RS485 weight transmitter with 16-bit analog outputs: 0/4–20 mA, 0–5/10 V, ±5/10 V, and an RS485 Modbus port. It features a backlit LCD display measuring 38 × 16 mm, with two lines of eight digits each (5 mm character height). It can be mounted on an Omega/DIN rail at the rear of a panel or installed in an enclosure.

WEIGHT INDICATOR MODEL WDOS UNLOAD 115Vac + ANALOG OUT-PUT

WEIGHT INDICATOR MODEL W200 MULTIPROGRAM + ANALOG OUT-PUT

Mounting accessory for FTx cells, zinc-plated steel self-centering bracket

WEIGHT INDICATOR MODEL W200 MULTIPROGRAM 115Vac