Manufacturers

RTD to mA/V DC converter, with PT100 input of 2/3/4 wires and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc directly to terminals or through K-BUS accessory

High performance converter from RTD to mA/V DC, with PT100 input of 2/3/4 wires and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

DC current/voltage to DC current/voltage isolator/converter. Input from 0/4 to 20mA or 0 to 10V and output 0/4 to 20mA or 0 to 10V. Configurable I/O range. DIN rail mounting. Power supply 19~30Vdc directly to terminals or through K-BUS accessory

DIN rail bus system head terminal + 3 slot 17.5 mm

Thermocouple to mA / V converter, with thermocouple input type B, E, J, K, R, S, T, N and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

Analog voltage/current converter with 0-10Vdc/4-20mA input and output, 1.5 kVac galvanic isolation, 3-way, DIN rail mounting, 24 Vdc power supply, optional K-BUS connectivity

Amplifier/Converter with a pulse input (Contact IEC 1131.1 tipo 1, Namur, PNP/NPN, reed, photocell) and 2 outputs (PNP, BJT, Mosfet) of 60 mA/24Vdc. Max frequency: 20KHz. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

Universal digital conditioner / isolator, one pulse input (Contact IEC 1131.1, Namur, PNP / NPN, reed, photocell) and 2 simultaneous outputs (NPN, PNP) of 30Vdc. Max frequency: 400Hz. DIN rail mounting. Feeding from 19 ~ 30Vdc or K-BUS accessory

RTD to mA DC converter/isolator, with 2/3/4 wire PT100/Ni100 resistance thermometer input and provides a mA output signal (4 to 20mA or 20 to 4mA). Configurable output range. DIN rail mounting. Power supply 5 ~ 30Vdc or through K-BUS accessory

Pt100 and Ni100 to 4..20mA (loop powered) converter - non isolated/ configured

Power supply / amplifier for on/off sensors/ Power supply 24 Vac / dc

Isolator / Converter with one input for (mA, mV, V, RTD, TCs, ohms) and convert it to an output signal from 4 to 20mA. Galvanic isolation of 3 ways. DIN rail mounting. Feeding from 7 to 30Vdc or with K-BUS accessory

Welding thermowell, with 1/2" male PT100

Pt100 standard IEC 751/ Trap lenght 200 mm

Pt100 standard IEC 751/ Trap lenght 50 mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 100mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 150mm

10 CH DO module / RS485 ModBUS RTU

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 200mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 50mm