Pt100 standard IEC 751/ Pt100 ambient with 4-20mA output

4-CH analog input module / RS485 Modbus RTU module. Power Supply: 10~40 Vdc; 19~28 Vac (50-60 Hz). Input: CH-4 voltage (up to a ±10 Vdc) or current range (up to ±20 mA). Resolution: 15 bit + sign

4 Ch RTD (P100, Ni100, Pt500, Pt1000) input CANopen module

Pt100 standard IEC 751/ Pt100 ambient

RS485 / RS485 serial repeater, used to extend both the length or the number of devices admitted (Maximum 32) on the RS485 serial line. DIN rail mounting. Power supply: 19 ~ 30Vdc direct in conditioner or with K-BUS accessory

RS485 <--> USB asyncronous serial converter, interface able to implement a RS485 serial port by using a PC USB port. Connect Modbus devices to PC by USB. DIN rail mounting. Power by USB port. Includes USB connection cable

DC low voltage converter to mA or V. Input scales +/- 25mV to +/- 2000mV. Ideal for current shunts. 3-way galvanic isolation (Power supply, input and output). DIN rail mounting. Power supply 19 ~ 30 Vdc directly to terminals or through K-BUS accessory

RTD to mA/V DC converter/isolator, with 2/3/4 wire PT100 resistance thermometer input and provides a mA/V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

RTD to mA/V DC converter, with PT100 input of 2/3/4 wires and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc directly to terminals or through K-BUS accessory

High performance converter from RTD to mA/V DC, with PT100 input of 2/3/4 wires and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

DC current/voltage to DC current/voltage isolator/converter. Input from 0/4 to 20mA or 0 to 10V and output 0/4 to 20mA or 0 to 10V. Configurable I/O range. DIN rail mounting. Power supply 19~30Vdc directly to terminals or through K-BUS accessory

Universal digital conditioner / isolator, one pulse input (Contact IEC 1131.1, Namur, PNP / NPN, reed, photocell) and 2 simultaneous outputs (NPN, PNP) of 30Vdc. Max frequency: 400Hz. DIN rail mounting. Feeding from 19 ~ 30Vdc or K-BUS accessory

RTD to mA DC converter/isolator, with 2/3/4 wire PT100/Ni100 resistance thermometer input and provides a mA output signal (4 to 20mA or 20 to 4mA). Configurable output range. DIN rail mounting. Power supply 5 ~ 30Vdc or through K-BUS accessory

Welding thermowell, with 1/2" male PT100

Pt100 standard IEC 751/ Trap lenght 200 mm

Pt100 standard IEC 751/ Trap lenght 50 mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 100mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 150mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 200mm

Standard temperature probe IEC 751, Standard cast aluminum weatherproof thermal head and Sensor wetted parts: AISI 316. Sheath diameter: from 6 up to 8 mm. Process connection from 1/2 g.m. Probe lenght 50mm