8 CH AI module / CANOPEN

Transductor de corriente TRMS sin contacto AC / DC (± 300 A), Efecto Hall con salida de alarma/AO 0..10 V e interfaz ModBUS.

Thermocouple to mA / V converter, with thermocouple input type B, E, J, K, R, S, T, N and provides a mA / V output signal (0/4 to 20mA or 0 to 10V). Configurable output range. DIN rail mounting. Power supply 19 ~ 30Vdc or through K-BUS accessory

Pt100 and Ni100 to 4..20mA (loop powered) converter - non isolated/ configured

Power supply / amplifier for on/off sensors/ Power supply 24 Vac / dc

Dual Power Supply For Current Loop/ Power supply. 115 / 230 Vac

Power supply / amplifier for on/off sensors/ Power supply. 115 / 230 Vac

DC current/voltage signal duplicator

DC current isolator (self-powered) with a single input from 4 to 20mA and output from 4 to 20mA, galvanic isolation 1.5 kVac 2-way, DIN rail mounting. Power supply: From the 4-20 mA input loop

Digital contact amplifier/ 1 channel. Input: free contact, npn/pnp 2-3 wire, 24 Vdc, namur, photoelectric, Hall sensor, variable reluctance. Output: Nr 1 relay SPDT (5 A, 250 Vac)

Digital contact amplifier/ 2 channels

DC current / voltage Adder / subtracter, allows the addition or subtraction of 2 analog signals and obtain the equivalent output through an analog signal (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Feeding: 10 to 40Vdc or 19 to 28Vac

Mixed module with 16 CH digital inputs and 8 CH digital outputs, 32-bit counters in the inputs with a frequency of 10kHz, communication protocol: CANopen or ModBUS RTU (protocol selectable by dip-switch), power supply 10 to 40Vdc / 19 to 28Vac

Converter / isolator with a current input (0 ~ 20mA / 4 ~ 20mA) and a current output (0 ~ 20mA / 4 ~ 20mA). 3.5 kVac galvanic isolation, DIN rail mounting. Can feed 2-wire sensors, Power: 10 to 40 Vdc or 19 to 28 Vac

Universal converter with 1 analog input (mA, V, RTD, TCs, Ohm), 1 strobe input, 1 anaog output mA/V and 1 digital contact available as ALARM or STROBE, settable by DIP switch or software with microUSB. Power supply 10 ~ 40 Vdc / 19 ~ 28 Vac

Converter / isolator with a current input (+/-20mA) or voltage (100mV ~ 20V) and a current output (0 ~ 20 mA / 4 ~ 20mA) or voltage (0 ~ 10V / 2 ~ 10V). 1.5 kVac galvanic isolation, DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac

Duplicator / isolator with universal input and 2 output (mA or V). Galvanic isolation 1.5 kVac 4-way, micro USB port, configurable by app, DIN rail mounting. Power supply: 10 to 40 Vdc or 19 to 28 Vac

3 CH analog output (mA, V) CANopen module