Rogowski sensor, output 50mV/kA, 50-60 Hz, Ø 115 mm

Rogowski coil designed for accurate non-intrusive measurement of AC/ pulsed DC or complex waveforms This type of transducer may be used to measure all AC current from low frequencies to 5 kHz.

LCD 96x96 Energy PLUS Power Meter Kit , Modbus TCP/IP Ethernet,8MB log.,1 DI 2 DO, harmonics, 3 Rogowski RC150 L= 30 cm Øint. 9,5 cm

Option : 2 SPDT relays/ ModBUS RTU interface/ contact for reset (only for S311A-S311D)

AC Current Trasducer to DC current, adjustable input range by dip switch 5, 10, 15, 20, 25, 30, 35, 40A. Output 4 to 20mA, power supply range 5 to 28Vdc. Includes 1 x A-DIN-T201 for DIN rail mounting

DC Current Trasducer to DC current with input from 0 to 40A (Monopolar) and -5 to 40A (Bipolar). Output from 4 to 20mA, power 6 to 100V. Includes 1 x A-DIN-T201 for DIN rail mounting

AC current to DC current/voltage isolator and converter. Input 5A or 10A AC, output: voltage: 0~1, 0~5, 0~10, 2~10 V dc or Current: 0~20 or 4~20 mA. 3-way galvanic isolation among power supply, input and output. Power supply 10~40 Vdc or 19~28 Vac

Converter / isolator of AC / DC voltage to DC current, with AC / DC input (0 ~ 500Vac / 0 ~ 540Vdc) configurable by DIP Switch and output 4 to 20mA. 3-way galvanic insulation (power, input and output). DIN rail mounting. Power supply of 5 ~ 28Vdc

AC current to DC current/voltage isolator and converter. Input 5A or 10A AC, output: voltage: 0~1, 0~5, 0~10, 2~10 V dc or Current: 0~20 or 4~20 mA. 3-way galvanic isolation among power supply, input and output. Power supply 85~265 Vac/Vdc

Converter/isolator of AC voltage to DC current/voltage, with AC input (0 ~ 500Vac) and current or voltage output (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Galvanic insulation. DIN rail mounting. Power supply: 10 to 40Vdc or 19 to 28Vac

Converter/isolator of AC voltage to DC current/voltage, with AC input (0 ~ 500Vac) and current or voltage output (0-20mA and 4-20mA or 0-1 / 0-5 / 0-10 and 2 to 10Vdc). Galvanic insulation. DIN rail mounting. Power supply: 85~265 Vac/Vdc

24 CH DI module / CANOPEN-RS485 ModBUS RTU

24 CH DO module / CANopen-RS485 ModBUS RTU

AC three phase network analyzer with energy meter. Voltage Input: 0~600 Vac. Current Input 0~5 Arms. Digital Output: Energy meter pulse. Analog Output: Re-transmitted (mA/ V). Power S

AC / DC contactless TRMS direct and alternate current transducer with input for +/- 100A AC / DC, configurable by DIP switch, output from 0 a 10Vdc, diameter of 21mm, power supply 11 to 28VDC, Includes 2 x A-DIN-T201 for DIN rail mounting

Transformer of alternating current/direct (TRMS) of closed core for measurement up to +/-300A ac/dc, Hall effect. Output 0 to 10V, power 12 to 28Vdc.

Three-phase Network Analyzer for Rogowski sensor/ with display/ measures up to 600VAC or 1000A

Converter/isolator of AC/DC voltage to DC current/voltage, with AC/DC input (0~850Vac / 0~1200Vdc) and current or voltage output (0/4 to 20mA or 0 to 10V). DIN rail mounting. Power supply: 10 to 40Vdc or 19 to 28Vac, Communication RS485 Modbus RTU

Rogowski sensor, output 100mV/kA, 50-60 Hz, Ø 115 mm

Rogowski sensor, output 100mV/kA, 50-60 Hz, Ø 147 mm